A packaging artwork handover checklist decides whether the box that arrives matches the brand you approved on screen. Most packaging disputes are not printing defects. They come from a file set that was never properly released: an outdated dieline, a logo sent as a small web image, a spot colour described only by its name, fonts that were never outlined, or a barcode placed across a fold. This guide is the buyer-side handover standard for custom packaging sourced from China: what to request from the supplier, what to send back, which revision counts as approved, and what a physical proof has to confirm. We are a sourcing, QC and freight partner, not a printing factory.
The short answer: what a released file set looks like
A released packaging file set has four families: an approved editable dieline with a revision number, editable artwork plus a reference PDF, a vector logo with outlined fonts and embedded linked images, and the functional graphics such as barcode data, SKU, legal copy and carton marks. Agree the colour method, coating and finish together with a physical standard on the actual substrate, because a screen match shifts between coated board, kraft and film. Mark bleed and safe area from the supplier’s requirement for that material and process rather than a universal value. Record the exact revision in the quotation, the sample and the production order; custom packaging explains the structure decisions that come before the artwork.
Why the same colour value is not the same colour
A spot reference, a process build and a physical draw-down can all be described as the brand colour. Only one of them is an acceptance standard. The blocks below are illustrative, not colour specifications.
The four file families in a clean handover
Ask for the supplier’s accepted formats before you commission design work. A file the prepress team cannot open is a delay, not a design opinion.
An editable flat blueprint showing cut lines, fold and score lines, glue tabs, panel boundaries, bleed and safe area, with a revision number. Final artwork must be built on the approved revision for the chosen structure, material and packing method.
Vector source with layers kept usable, plus a reference PDF that shows the intended finished appearance. The PDF lets the prepress team compare what opened against what was meant.
Logo in vector form, fonts outlined or supplied where licensing allows, and all linked images embedded or provided separately at their final placed size.
Barcode or QR data, SKU, handling marks, recycling icons and legal copy, each with a defined position and version. Private label sourcing explains where these sit in a branded SKU.
The handover checklist, field by field
| Item | What the buyer supplies | What to confirm with the supplier |
|---|---|---|
| Structure | Box style, internal dimensions, clearance, insert plan, orientation | Released dieline revision matches the chosen structure and material |
| Bleed & safe area | Background extended to the marked bleed boundary; critical content inside safe area | The required bleed for this material and print method, not a universal value |
| Colour | Process values or an agreed spot reference, plus a physical standard | Colour method, coating and finish approved together on the actual substrate |
| Type & images | Outlined fonts, vector logo, high-resolution linked images at final size | Minimum text size and line weight that the process can hold |
| Codes | Buyer-approved barcode data, quiet area, no placement across folds or glue areas | A practical scanner check in an agreed setup; formal verification is separate |
| Finishes | Separate layer marking foil, emboss, deboss or spot UV positions | Which panel each finish lands on after folding and assembly |
| Version | File name, revision, date, approver and a list of open items | The exact revision the quote, sample and production run will use |
The release sequence that prevents the classic errors
Start with the structure, not the artwork. Choose the box style and material, measure the product with clearance, and request an editable dieline from the supplier that will actually make the box. A dieline borrowed from another supplier or generated from a visual mockup may explain the idea, but it is not the released production structure. Only after that revision is approved should final artwork be placed on it. Custom packaging sourcing describes how structure, material and packing method interact; the brief checklist helps you capture the dimensions and channel constraints before the request goes out.
Next, preflight the file set as a package. Editable source and reference PDF must show the same design; fonts must be outlined or supplied; linked images must be at their final placed resolution; and the barcode must sit inside a clear quiet area on a panel that will still be flat after folding. Ask the supplier to confirm the required bleed for the selected material and process rather than applying one universal value. Mark inside print and outside print clearly. Where retail or logistics scanning matters, a practical scanner check in an agreed setup is useful, but it is not the same as standards-based barcode verification.
Finally, approve physically. Request a colour draw-down on the real substrate and a folded sample, then record the approved version, the accepted deviations and the signatory in one sheet. Tie that revision to the product specification, the label copy and the carton marks so the packing team works from the same description. Our procurement desk holds the master file across the box supplier and the product supplier, and pre-shipment inspection checks the finished run against the signed reference rather than against a screenshot. Custom manufacturing projects use the same freeze-and-approve discipline for physical changes.
Five steps from a rough idea to a released file
You can request an early structural quote before final artwork exists. What you cannot do is release production from an early quote.
Product dimensions and weight, packaging type, quantity per SKU, channel, destination market and any printing or finishing direction. Mark artwork as OPEN.
Request an editable dieline plus a panel map and review it against the product, insert and packing method. Record the revision.
Place the design on the approved dieline, outline fonts, embed links and mark finish layers. Issue a reference PDF with the same revision.
Check bleed, safe area, small text, codes and colour method. Approve a physical draw-down and a folded sample. Supplier verification should be complete by now.
We are not a printing factory, do not certify products and do not issue test reports. Barcode verification, food-contact or other regulated claims, and destination-market labelling should be confirmed with a qualified compliance body or licensed broker. Keep those records in the same submittal index as the approved artwork revision.
Frequently asked questions
Can I send only a logo and a product photo?
For an early structural estimate, yes. For production you need a released dieline and print-ready files. The packaging guide explains what changes between the two stages.
Who provides the dieline?
The supplier building the structure should issue an editable dieline for the chosen material and packing method. If you already have one, ask for a review rather than assuming it is production-ready.
Should artwork be CMYK or a spot colour?
That depends on the print method and whether a brand colour is critical. Agree the colour method, coating, finish and a physical reference together with the supplier.
Why outline fonts and embed linked images?
Otherwise the file can open differently at the prepress stage, changing text or dropping images without anyone noticing until the sample. A reference PDF gives the team something to compare against.
Where does the artwork revision live after approval?
In the same master file as the product specification, labels and carton marks. Our procurement service holds one revision across suppliers, and shipping documents then describe the same goods.
Send the specification and we will build the quote around it.
Include the product or drawing, the destination market, your quantity breaks, the changes you want made, and the documents your channel requires. We work as your sourcing, quality control and freight partner in China; we are not a factory and do not issue test reports or certificates.
WhatsApp / Phone: +86 186 7676 3055
Email: info@cinosourcing.com
Or use the contact form.
Part of our Custom Product Sourcing From China hub: specification control, tooling, sampling, inspection and shipping for wholesale, OEM and project orders.
