Custom Happi Coats: The Artwork, Colours and Sizes a Factory Needs

Short answer: a custom happi coat order rarely goes wrong at the sewing machine. It goes wrong at the artwork handover — a low-resolution logo, a colour described as “same as our website”, or a print position given as “on the back”. Send a vector file, real measurements, a colour standard and a size breakdown, and the bulk looks like the proof.

A happi coat is a simple garment: a straight-cut body, wide sleeves, an open front and a contrast collar band. That simplicity is exactly why the artwork carries all the risk. The crest, the event name and the kanji on the back are the whole point of the order, and they are also the part most often specified in words instead of numbers.

Why the artwork decides the outcome

A logo that looks sharp on a phone becomes blurry when it is enlarged to a 30 cm back print. Thin lines disappear in screen separation, small text becomes unreadable, and a distressed texture can print either too dirty or too faint. Embroidery is stricter still: a fine-line mark needs digitising and a minimum stitchable line width, and too dense a stitch count makes the cloth stiff. The factory cannot repair a weak source file; it can only reproduce it.

Five things a factory needs before it can quote properly

  1. Vector artwork — AI, EPS, SVG or a vector PDF for logos and lettering; a high-resolution layered raster only for photographic or gradient designs.
  2. Print placement and size in centimetres, measured from a fixed reference point on the garment.
  3. A colour standard — a Pantone reference for ink, a physical swatch or lab dip for dyed cloth, and the number of print colours.
  4. A size breakdown by size and quantity, with adult and kids’ runs separated, plus any name list for individual embroidery.
  5. Label, care and packing text — woven label wording, care symbols, hang tag copy, and whether each piece needs an individual polybag.

Which file does what

File or reference What the factory uses it for
Vector AI, EPS, SVG, vector PDF Clean logo edges, lettering, screen colour separation and embroidery digitising.
High-resolution PSD / transparent PNG Gradients, photographic artwork, digital and sublimation printing.
JPG or a screenshot Visual reference only. Not a production file.
Pantone number / swatch / lab dip Ink matching, dyed-cloth approval and colour control on reorders.

Our artwork handover checklist and product specification sheet guide show how to put all of this into one document.

Placement needs numbers, not a reference photo

Write it as: back print 30 cm wide, centred, top edge 8 cm below the collar seam; chest logo 8 cm wide on the wearer’s left, 6 cm below the shoulder seam; sleeve text 12 cm wide, 4 cm above the cuff. A reference photo has no scale — the garment in it may be a different size, fit or camera angle. If kids’ and adult garments share one artwork, state the print size for each separately.

The same applies to embroidery: give the height in centimetres, the thread colour, whether the back needs trimming, and whether backing is required. “About this big” and “you decide” are where bulk surprises start.

Screen colour is not a production standard

Indigo
Vermilion
Kinari
Sumi
Gold

A colour looks different on a phone, in design software and under factory lighting. Pantone references are useful for screen-print ink, while fabric dyeing needs a lab dip or a bulk cloth swatch. Embroidery thread has its own tolerance again. Approve a physical strike-off and keep it: that swatch becomes the reference when the restaurant reorders next season or the festival committee orders again next year.

Print method follows fabric and artwork

1
Screen printing
Bold solid logos, a limited number of colours and repeat runs. Needs colour separation, and a white underbase on dark cloth.
2
Digital & sublimation
Multi-colour or gradient artwork. Sublimation bonds with polyester, so it is not a cotton solution; ask which method suits your chosen cloth.
3
Embroidery
Chest marks and individual names. Needs digitising, a minimum line width and a stated stitch density so the fabric does not go stiff.

Whichever method is chosen, write the wash requirement into the spec. Cracking, peeling, colour bleed and a change in hand feel after washing are the failures buyers notice first, and they are far cheaper to test on a strike-off than on a container.

What to check before bulk is released

1
Approve on the real cloth
A strike-off made on the production fabric, not a paper proof.
2
Check at full size
Print registration, edge sharpness, small text and the measured position.
3
Ask for a wash check
Cracking, peeling, colour bleed and hand feel after washing.
4
Verify the written spec
Fabric weight and composition, care-label wording, labels and carton packing.
5
Keep the reference
The signed specification and approved sample become the reorder standard.

Sample approval gates, first-article inspection and pre-shipment inspection are the three points where these checks belong.

Repeat orders and fixed festival dates

The second order is where a specification earns its keep. Dye lots and ink batches drift, so the approved swatch, print position sheet and packing spec stay on file and the acceptable tolerance is written into the order. For a matsuri or a store opening, the date is part of the specification: the production slot and freight routing are agreed before any deposit, and if a date is not realistic we say so upfront. Our quoted price already includes our margin. There is no separate sourcing fee or commission added on top, and we do not set a strict MOQ of our own. Factory minimums vary by fabric, print method and construction, and are confirmed in writing before any deposit. Custom packaging and labelling and DDP shipping from China cover the last two steps.

Frequently asked questions

Q · Can the factory redraw a logo from a JPG?

Often yes, but redrawing is a separate artwork step and small details may be interpreted. Sending the original vector file is always faster and safer, especially for lettering and crest-style marks.

Q · How many print colours can a happi coat have?

Screen printing needs a separate screen per colour, so a limited palette suits repeat runs. Multi-colour or gradient artwork is usually better on digital or sublimation printing, depending on the fabric. State the colour count in the spec.

Q · Do kids’ happi coats use the same artwork size?

No. A back print that fills an adult garment will overwhelm a child’s. Give a separate print width and placement for each size run, or approve a proportional scaling rule in writing.

Q · Can you guarantee an exact colour match on a reorder?

No honest supplier can. What we can do is keep the approved physical swatch and specification, record the acceptable deviation, and check the new batch against that reference before loading.

Related reading

ONE WRITTEN SPEC · ONE ALL-IN PRICE

Send your artwork, size breakdown and destination

A logo file, a photo of the garment you currently use and the quantities per size are enough to start. We confirm the spec in writing and quote the product, inspection, consolidation and freight as one all-in price.

Request a quote WhatsApp us

Leave a Comment

Your email address will not be published. Required fields are marked *