The number on the box is a capacity, not a dimension.
Send the brewer model or a dimensioned drawing. We confirm the format in writing before a bulk order.
A US buyer asks for “#4 coffee filters in bulk” and receives cone filters for a flat-bottom machine. The number is right, the geometry is wrong, and the whole carton is unusable. Cone, basket, wave and square bonded filters are four different products that happen to share a shelf. Fit is decided by the brewer, not by the label on the box.
How brand names are used here. Brewer and dripper names are used only to identify the geometry. We do not claim authorised compatibility or OEM affiliation. A physical sample or a dimensioned drawing is the reference, and we confirm the match in writing.
SECTION 01Four geometries, four different fit problems
- Comes to a point; used in pour-over drippers and many automatic drip machines.
- Wall height and crimp decide whether the paper seals against the holder.
- Common size labels: #1, #2, #4, #6 and dripper-specific 01 / 02 / 03 codes.
- Flat base with fluted walls; standard in 8 to 12 cup domestic and office machines.
- Base width and rim diameter matter more than the number printed on the box.
- Commercial batch brewers use their own larger basket sizes and need a separate line.
Two more formats belong on a wholesale list: waved or flat-bottom papers for specialty drippers, where the crimped edge holds the paper off the wall, and thick square bonded sheets for carafe-style brewers. Single-serve drip bags, UFO formats and round espresso papers are their own product families again. Each one needs its own specification line.
SECTION 02What #2 and #4 actually tell you
| Label | Typical use | What still has to be confirmed |
|---|---|---|
| #1 / #2 cone | Small pour-over drippers, 1 to 2 cup and compact electric machines | Base width, wall height, crimp position and the dripper it must fit |
| #4 cone | Large pour-over cones and 8 to 12 cup domestic drip machines | Rim height, whether the holder is conical or wedge shaped, and the crimp height |
| #4 / #6 basket | Flat-bottom domestic machines and larger office brewers | Base diameter, wall height and whether the basket is fluted or smooth |
| Size 01 / 02 / 03 | Dripper-specific pour-over codes, not a universal scale | The exact dripper model, because the codes are not interchangeable between brands |
| Commercial batch | High-volume café, hotel and office coffee service brewers | The brewer make and model, plus a sample of the filter currently in use |
Generic papers are often a few millimetres shorter or narrower than the branded original. If the edge curls or the wall sits below the basket rim, water bypasses the coffee bed and the cup turns weak. This is the single most common complaint we hear from distributors.
SECTION 03The measurement pack to send with the enquiry
SECTION 04Bypass, collapse and seam failure
- Bypass. A short wall lets water run around the paper instead of through the bed. The fix is a dimension change, not a thicker paper.
- Collapse. A cone forced into a basket holder folds in on itself and spills grounds. Geometry cannot be corrected by grade.
- Seam failure. Under hot water and a full bed, the crimped or bonded seam is the weak point. Confirm the seam method in writing: heat-pressed, ultrasonic or adhesive-free.
- Wet strength. Ask for the test method and the accepted limit on the specification, not for a marketing word such as “extra strong”.
SECTION 05Commercial brewers are a separate line item
A café chain running batch brewers does not reorder the same paper as a grocery private-label program. The baskets are larger, the fill rate is faster, and a burst seam during a morning rush costs far more than the carton. Put commercial baskets on their own line with the brewer model, the current filter sample and the required wet strength. Our wholesale sourcing page explains how we separate repeat-stock lines from one-off project lines.
SECTION 06From fit sample to a repeat order
SECTION 07Questions buyers ask
Q · Can I order by size number alone?
You can start the enquiry that way, but we will ask for the brewer model or a drawing before a bulk order. The same number covers different geometries across brands.
Q · Do you print custom boxes for each shape?
Yes, and the box artwork has to match the shape and pack count on the specification. Our custom packaging guide covers the artwork and approval path.
Q · How are your fees charged?
Our quoted price already includes our margin. There is no separate sourcing fee or commission added on top, and we do not set a strict MOQ of our own. Factory minimums vary by format and are confirmed in writing before any deposit.
Keep reading
Send the brewer model, not just a size number
One written specification, one approved fit sample, and one all-in price covering product, inspection, consolidation and freight.
