WEIGHT DESK / 04
Heavy Hardware Imports From China: Weight, Cube and Load Economics
Why a container of fittings, fixings and valves behaves nothing like a container of light consumer goods – and what that means for range planning.
ardware is heavy. That single fact quietly reorganises almost every decision in an import programme: which lines belong together, how cartons are built, what packaging survives the journey, and why the cheapest unit price is so often not the cheapest landed range.
The short answer
A dense hardware assortment is usually weight-limited before it is space-limited. Build the range with that in mind: pair dense lines with lighter, bulkier ones, and treat packaging as a specification, not an afterthought.
Relative bands only, for assortment planning. No rates, prices or capacities are implied.
Two lines can have the same unit price and completely different freight behaviour. A carton of brass fittings can reach a weight constraint while the container still looks half empty; a pallet of retail-packed kits can fill the space with very little weight in it. Neither is a problem on its own. The problem is a range made entirely of one or the other.
This is why line selection and freight planning are the same conversation. We do not publish capacities, rates or transit times; the freight desk works from the actual packing list once the configuration is frozen.
The layers that sit between a unit price and a landed range
A unit price is one line in a much longer worksheet. Naming the layers early is what keeps a comparison honest.
Duties and taxes belong in their own line for confirmation with your licensed broker, never folded into a headline landed price. The itemised landed-cost guide sets out the worksheet, and the importer-of-record guide settles who is accountable at the border.
Why packaging is a specification, not an afterthought
Dense goods damage themselves. The failures are usually invisible until the cartons are opened at the destination.
Heavy fittings and plated hardware rub against each other in transit. Finishes scratch, threads deform, cartons crush under their own stack weight, and marks become unreadable. None of these show up in a sample photograph.
The fix belongs on the configuration sheet: inner separation, carton strength, stack logic, pallet treatment and shipping marks are all frozen before production. Custom packaging is a separate workstream where retail presentation matters.
At the load point, carton numbering and a single packing list have to match the physical goods. Pre-shipment inspection is where that consistency is checked.
How a mixed range is planned
A load plan is not a packing list drawn afterwards. It is a decision about which lines travel together.
| Consideration | Why it matters | Where it is decided |
|---|---|---|
| Dense versus bulky balance | A range of only dense lines can hit a weight constraint before the space is used; a range of only light lines does the reverse. | Range review, before quotations |
| Carton and pallet logic | Stack behaviour and protection depend on carton strength, not on the shipping method chosen later. | Configuration sheet |
| Multi-factory staging | Goods from several plants need compatible carton numbering and one coherent document set. | Consolidation plan |
| Model-matched documents | A family-level document does not describe the exact variant in the carton. | Document check |
| Destination handover | Classification and importer responsibilities are settled before loading. | US entry guide |
Terms worth agreeing before a load plan is written
These words get used loosely. Agreeing what they mean prevents a lot of avoidable rework.
A practical sequence for a dense range
The order of work matters more than the number of steps.
Where a line is made to your own drawing rather than selected from an existing range, custom manufacturing adds tooling, artwork and approval gates to this sequence. First-article inspection is the point where the first production units are checked against the agreed specification.
Common questions about freight economics
Short answers, without rates or transit promises.
Do you quote freight rates on a page like this?
No. Rates and capacities depend on the actual packing list, the origin points and the destination. We work from a frozen configuration and then confirm a written, itemised scope. See our services.
Can dense and bulky lines be shipped together?
Usually yes, and often that is the point of planning the mix. The decision belongs at the range stage, not after the cartons are built.
Who decides customs classification?
Classification and applicability are confirmed with a qualified body or your licensed broker. We prepare a coherent document set and coordinate the handover; we do not make customs determinations.
How do you prevent transit damage?
Packaging is frozen as part of the configuration sheet, then checked against the signed reference by pre-shipment inspection before loading.
What size of programme do you take on?
We work with wholesalers who have a stock-holding plan or an agreed repeat volume, and with fit-out or project orders. No minimum quantities, price lists or lead-time figures are published.
CINOSOURCING is a China-based sourcing, quality-control and freight partner working on the buyer’s side. We are not a factory and do not present ourselves as one. Confirm destination-market requirements with a qualified compliance body or your licensed broker.
This note is part of the wholesale hardware sourcing field guide, written for US distributors building repeat-stock programmes.
